Full List P.1
GOST EN DIN ASTM
09А      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
09Г2С      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
09ХГ2НАБЧ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
10 C10E 1.1121  
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Hexagonal cold-drawn h11 14-46
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
10Г2      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
10Г2С1      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
10Х2М 10CrMo9 10 1.7380  
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
10Х2М-ВД      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
10Х2М1ФБ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
10ХГН1 10NiCr5-4 1.5805  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
10ХН1М      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
10ХСНД      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged, peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-15 x 80-350 
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
12Х1МФ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
12Х2МФСР      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
12Х2Н4А      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
12Х2Н4А-ВД      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
12Х2Н4А-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
12Х2Н4М1ФА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
12Х2НВФА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
12Х2НВФА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
12Х2НВФМА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
12Х2НВФМА-ВД      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
12Х2НВФМА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
12Х2НМФА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
12Х2НМФА-ВД      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
12Х2НМФА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
12Х5М 12CrMo19 5 1.7362  
12Х7СЮ X10CrAL7 1.4713  
12Х8      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
12Х8ВФ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
12ХH3А     655М13
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
12ХH3А-У     655М13МОД
12ХН      
Dimensions
cross-section finish Size, mm
Round ground and polished h10 3-10
Round ground and polished h11 3-50
Round cold drawn h11 2-40
Round hot rolled, peeled 20-100
12ХН2      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
12ХН3А-ВД      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
12ХН3А-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
13H2ХА      
13Х3НВМ2Ф-Ш      
Dimensions
cross-section manufacture Size, mm
Round Rolled without turn 8-130
Round Forged without turn 80-180
Round Rolled turned 130-250
Square Rolled without turn 8-100
Square Forged without turn 80-180
13ХМ 13СrMo4 5 1.7335  
14ХH3 14NiCr14 1.5752 F1540T
14ХH3М 14NiCrMo13-4 1.6657  
14ХH4 14NiCr18 1.5860  
14ХГН      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
14ХГН-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
14ХГС      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
14ХГСН2МА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
14ХГСН2МА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
14ХН3М 14NiCrMo13-4 1.6657 9310, E9310, 9310RH
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-230
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
14ХН3МА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled 50-150
Round hot rolled, peeled 50-150
15 Ck15, C15E 1.1141 1015, 1017
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Hexagonal cold-drawn h11 14-46
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
15H3МА      
Dimensions
cross-section finish Size, mm
Round hot rolled 50-150
Round hot rolled, peeled 50-150
15Г C15E 1.1148  
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Hexagonal cold-drawn h11 14-46
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
15Г1      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
15ГС      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
15М 15Mo3 1.5415  
15Н3МА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled 50-150
Round hot rolled, peeled 50-150
15Х      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Hexagonal cold-drawn h11 14-46
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
15Х1ГМФ 15CrMoV59V 1.8521  
15Х1М1Ф      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
15Х1МС     F11
15Х2H2 15CrNi6 1.5919  
15Х2ГН2ТА      
Dimensions
cross-section manufacture Size, mm
Round hot rolled 8-130
Round hot rolled, peeled 20-190
Round forged, peeled 80-180
Round open-die forged, turned 180-200
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
15Х2ГН2ТРА      
Dimensions
cross-section manufacture Size, mm
Round hot rolled 8-130
Round hot rolled, peeled 20-190
Round forged, peeled 80-180
Round open-die forged, turned 180-200
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
15Х2М1     F22
15Х5      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
15Х5ВФ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
15Х5М     F5
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
15Х9М1С     F9
15ХH3М 14NiCrMo13 1.6657 832М13
15ХГ 16MnCr5 1.7131  
15ХГМ 18CrMo4 1.7243  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
15ХГН 16NiCr4 1.5714  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
15ХГН2ТА      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged, peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-15 x 80-350 
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
15ХГН2ТА-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged, peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350 
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
15ХГН3 15NiCr1-3 1.5752 3310, E3310, 3310RH, 3312, 3316, E3316
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
15ХГНМ      
Dimensions
cross-section finish Size, mm
Round ground and polished h10 3-10
Round ground and polished h11 3-50
Round cold drawn h11 2-40
Round hot rolled, peeled 20-100
15ХГР 16MnCrB5 1.7160 ZF6
15ХМ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
15ХМ-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
15ХРА      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
15ХФ      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
16ГС      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
16Х3HВФМБ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
16Х3НВФМБ-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
16ХH3М 16NiCrMo12    
16ХГ 16MnCr5 1.7131 5115
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
16ХГ-У 16MnCrS5 1.7139  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
16ХГH 16NiCr4 1.5714  
16ХГН-У 16NiCrS4 1.5715  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
16ХГР 16MnCrB5 1.7160  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
16ХГТА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
16ХГТА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
16ХН3МА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
16ХСH      
Dimensions
cross-section finish Size, mm
Round ground and polished h10 3-10
Round ground and polished h11 3-50
Round cold drawn h11 2-40
Round hot rolled, peeled 20-100
17H3МА      
Dimensions
cross-section finish Size, mm
Round hot rolled 50-150
Round hot rolled, peeled 50-150
17Г1С      
Dimensions
cross-section manufacture Size, mm
Round Rolled without turn 8-275
Square Rolled without turn 8-100
Square Rolled without turn 45-200
Square Forged without turn 80-100
17ГС      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
17Н3МА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled 50-150
Round hot rolled, peeled 50-150
17Х2H2М 17CrNiMo6B 1.6587  
17Х2ГН2 17CrNi6-6 1.5918  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
17ХH3 15NiCr13 1.5752  
17ХГ 17Cr3 1.7016 5117, 6118, 6118H
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
17ХГ-У 17CrS3 1.7014  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
17ХГH1М 17NiCrMo6 1.6566  
17ХГH2     16220
17ХГН1М 17NiCrMo6-4 1.6566  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-230
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
17ХГН1М-У 17NiCrMoS6-4 1.6569  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-230
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
17ХГР     ZF7
18Г     1018
18Г2      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
18Г2А      
18Х1ГМФА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
18Х2H2 18CrNi8 1.5920  
18Х2ГН2М 17CrNiMo7-6 1.6587  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-230
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
18Х2Н4ВА      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
18Х2Н4ВА-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
18Х2Н4МА      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
18Х2Н4МА-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
18Х3МВ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
18ХГ      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
18ХГH1 18NiCr5-4 1.5810  
18ХГHМ     F1580T
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
18ХГМ 18CrMo4 1.7243  
18ХГМ-У 18CrMoS4 1.7244  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
18ХГН2 18NiCr5-4 1.5810  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
18ХГН2МФБ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
18ХГСН2МА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
18ХГТ      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Hexagonal cold-drawn h11 14-46
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
18ХГТ-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
18ХМ 18CrMo4    
18ХН2М      
Dimensions
cross-section finish Size, mm
Round hot rolled 50-150
Round hot rolled, peeled 50-150
18ЮА      
Dimensions
tr>
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
19Г2     150M19
19ХHМ 18NiCrMo5    
19ХГН      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
19ХГН-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
19ХГНМА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled 50-150
Round hot rolled, peeled 50-150
20 C22E 1.1151 1023
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Hexagonal cold-drawn h11 14-46
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20-У C22R 1.1149  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
20Г      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20Г2      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20Г2Р      
Dimensions
cross-section finish Size, mm
Round ground and polished h10 3-10
Round ground and polished h11 3-50
Round cold drawn h11 2-40
Round hot rolled, peeled 20-100
20Г2Ф 20MnV6 1.5217  
20К      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
20Н2М      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged, peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350 
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20Н2М-Ш      
Dimensions
cross-section manufacture Size, mm
Round sized 2-45
Round sized 3-45
Round Rolled without turn 8-250
Round Rolled without turn 8-260
Round Forged without turn 80-190
Flat Rolled without turn 6-0 x 40-0
Flat Rolled without turn 6-0 x 50-0
Flat Rolled without turn 8-0 x 45-0
Flat Rolled without turn 8-0 x 50-0
Flat Rolled without turn 10-0 x 45-0
Flat Rolled without turn 12-0 x 45-0
Flat Rolled without turn 40-0 x 150-0
Square Rolled without turn 8-100
Square Forged without turn 80-200
Hexagon Rolled without turn 16-37
20Х      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Hexagonal cold-drawn h11 14-46
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20Х-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20Х1ГМ 20CrMo5 1.7264  
20Х1М1Ф1БР      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
20Х1М1Ф1БР-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
20Х1М1Ф1ТР      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
20Х1М1Ф1ТР-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
20Х2ГМ 20CrMo5 1.7264  
20Х2Н4А      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20Х2Н4А-ВД      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20Х2Н4А-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20Х3МВФ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
20Х3МВФ-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-180
Round forged, peeled 80-180
20ХH4М X19NiCrMo4 1.2764  
20ХГ 20MnCr5 1.7147 5120, 5120H
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
20ХГ-У 20MnCrS5 1.7149 5120, 5120H
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
20ХГHМТА      
Dimensions
cross-section finish Size, mm
Round hot rolled 8-70
Round hot rolled, peeled 20-70
20ХГМ 20MoCr4 1.7321  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
20ХГМ-У 20MoCrS4 1.7323  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round Coils 2-12.5
Round ground and polished 2-50
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Rolled turned 20-280
Round Forged turned 80-550
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Forged without turn 80-450
Square Blooms 190-280
Square Blooms 190-280
20ХГН2М-У 20NiCrMoS6-4 1.6571  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-230
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
20ХГНМ 20NiCrMo2 1.6523 8620
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХГНМ-У 21NiCrMoS2 1.6526  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-230
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
20ХГНР      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХГНТР      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged, peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-15 x 80-350 
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХГНТР-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged, peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350 
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20ХГР      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХГСА      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХГСА-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20ХГСН2МФА-ВД      
Dimensions
cross-section manufacture Size, mm
Round hot rolled 8-130
Round hot rolled, peeled 20-190
Round forged, peeled 80-180
Round open-die forged, turned 180-200
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
20ХМ 20MoCr4 1.7321 4118, 4118H, 4118RH
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХМ-У 20MoCrS3    
20ХМ-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20ХМФ 21CrMoV5 1.8070  
20ХН      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХН-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20ХН2М      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХН2М-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20ХН3МФА-Ш      
Dimensions
cross-section manufacture Size, mm
Round open-die forged, turned 180-500
20ХН4ФА      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged, peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-15 x 80-350 
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХН4ФА-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged, peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350 
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20ХНЗА      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХНЗА-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
20ХНМ 21NiCrMo2 1.6523 8617, 8617H, 8620, 8620H, 8620RH
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-230
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
20ХНР      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
20ХНР-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged ,peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
21Н5А-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged, peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350 
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
21ХГМ 25MoCr4 1.7325  
22ХГМ-У 22CrMoS3-5 1.7333  
Dimensions
/table>
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
22ХГНМА-Ш      
Dimensions
cross-section finish Size, mm
Round hot rolled 8-70
Round hot rolled, peeled 20-70
23Х2НВФА      
Dimensions
cross-section manufacture Size, mm
Round hot rolled 8-130
Round hot rolled, peeled 20-190
Round forged, peeled 80-180
Round open-die forged, turned 180-200
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
23Х2НВФА-Ш      
Dimensions
cross-section manufacture Size, mm
Round hot rolled 8-130
Round hot rolled, peeled 20-190
Round forged, peeled 80-180
Round open-die forged, turned 180-200
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
23ХГ2HМ 23MnNiMoCr6-4 1.6753  
23ХГH1МА 23MnNiMoCr5-4 1.6758  
23ХГHМА 23MnNiCrMo5-2 1.6541  
25 C25E 1.1158 1025
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Hexagonal cold-drawn h11 14-46
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
25-У C25R 1.1163  
Dimensions
cross-section manufacture Size, mm
Round Cold-rolled 1.9-45
Round Coils 2-12.5
Round ground and polished 2-50
Round Rolled without turn 8-130
Round Rolled turned 20-280
Round Forged turned 80-550
Flat Rolled without turn 6-12 x 40-50
Flat Forged on Radial forging machine 30-150 x 80-350
Flat Rolled without turn 40-40 x 150-150
Flat Forged on presses 100-300 x 300-800
Square Rolled without turn 8-100
Square Forged without turn 80-450
Square Blooms 190-280
25Г      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 2-10
Round ground and polished h9 12-70
Round ground and polished h10 2-160
Round cold-drawn h11 2-45
Round  hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged ,peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
25Г2      
Dimensions
cross-section finish Size, mm
Square hot rolled billet, ground 100-180
Square bloom, ground 190-280
25Г2С      
Dimensions
cross-section finish Size, mm
Square hot rolled billet, ground 100-180
Square bloom, ground 190-280
25Х1МФ      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
25Х2H4МФ 35NiCrMo16 1.2766  
25Х2ГНТА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
25Х2ГНТА-ВД      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
25Х2ГНТРА      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
25Х2ГНТРА-ВД      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-230
Round forged, peeled 80-180
Round open-die forged, turned 180-270
25Х2М1Ф      
Dimensions
cross-section finish Size, mm
Round hot rolled, peeled 80-260
Round forged, peeled 80-180
Round open-die forged, turned 180-350
25Х2Н4ВА      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged, peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-15 x 80-350 
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
25Х2Н4ВА-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged, peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350 
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
25Х2Н4МА      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-280
Round forged, peeled 80-180
Round open-die forged, turned 180-550
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-450
Flat hot rolled 6-12 x 40-50
Flat forged 30-15 x 80-350 
Flat open-die forged, ground 100-300 x 300-800
Flat open-die forged, planed 100-300 x 300-800
25Х2Н4МА-Ш      
Dimensions
cross-section finish Size, mm
Round ground and polished h9 12-70
Round ground and polished h10 12-160
Round hot rolled 8-130
Round hot rolled, peeled 20-230
Round forged, peeled 80-180
Round open-die forged, turned 180-350
Square hot rolled 8-100
Square hot rolled billet 45-100
Square hot rolled billet, ground 80-180
Square bloom, ground 190-280
Square forged, ground 80-180
Square open-die forged, ground 180-350
Flat hot rolled 6-12 x 40-50
Flat forged 30-150 x 80-350 
Flat open-die forged, ground 100-300 x 300-600
Flat open-die forged, planed 100-300 x 300-600
25Х5М      
Dimensions
cross-section manufacture Size, mm
Round Rolled without turn 8-30
25ХH3М     9317-МОД
25ХГ 25CrMo4 1.7218  
25ХГ1НМФА      
Dimensions
cross-section finish Size, mm
Round hot rolled 8-70
Round hot rolled, peeled 20-70
Google (гугл)Google (гугл)Google (гугл)